To access the 10.0.0.1 IP address login page, use this link:
Here are some other popular gateway used by routers:
If none of the above works, one can find router IP address ! You can also have a look at the router’s manual to find the default gateway (login IP address) of your router !
10.0.0.1 (Router Passwords)
One can log in to the router admin setup page using the default router login credentials (username and password) assigned to the router. However, the administrator can modify them, and a router reset will be required to retrieve the factory ones. You can also get through our default router passwords list or you can look into your router’s manual or the router itself. Here are some of the most common logins of 10.0.0.1 IP address:
Username | Password |
user | user |
cisco | cisco |
*empty* | 1234 |
admin | admin |
*empty* | public |
*empty* | *empty* |
admin | password |
*empty* | swiadmin |
cusadmin | highspeed |
enduser | password |
10.0.0.0.1 – 10.0.0.1
10.0.0.1 correct and incorrect login IP formats:
People often misspelled and confused IP address numbers with alphabets leading to mass confusion and errors like a blank page and no loading. The table above shows the correct IP format; therefore, make sure you use the suitable versions to avoid any errors.
10.0.0.1 – Login
You can sign in to 10.0.0.1 admin using the default username & password to access the router’s settings. Logging in is not extremely complex, as you just need to have a reliable connection with the router to access the login page. Follow these easy steps to log in:
- Open any of the internet browser applications that you prefer using.
- In the URL bar, type http://10.0.0.1 or 10.0.0.1 and hit enter:
- The router login page will open up. Put in the login details:
Note: The router admin panel login username and password are not equivalent to your wifi connection password if you have not changed the one set to default by the router brand.
The username is admin & the password is password in most cases.
- You will be able redirected to the router’s admin panel:
You can now make desired changes to the wireless connection settings, such as wifi name, password, admin password, and more. Upon logging in to your router settings page, it is advised to change default passwords for the sake of security.
Leaving your wireless connection unprotected can allow others to get into your wireless connection as well as the admin section. Use a solid password that is no less than eight characters containing numbers and upper | lower case letters and unique characters.
10.0.0.1 (Troubleshoot)
If you are having some trouble to get access to 10.0.0.1 then it may be due to the following-
- The default IP address of your router or gadget is other than 10.0.0.1 because of which the program can’t find the Admin Panel at 10.0.0.1. Search for the right passage address and attempt once more.
- You are not composing the right IP address in the URL bar of the program. Now and again, users might type www.10.0.0.1.com, add https://at starting, botch “0” (zero) for “O” or 10.0.0.0.1 which is an invalid location. As a gateway, an IP address contains four decimal numbers which are portrayed in decimal form and here it is of five values. Because of this, you are having inconvenience to get to the Admin Panel.
- Playing out a restart of your WiFi network and router is the most widely recognized method of fixing. Stand by somewhere around a couple of minutes prior to reconnecting to your network.
- Make sure you can log into different sites, if there is an occurrence of network blackouts from your ISP during peak hours you might experience such an issue.
- Your internet browser stores the cache. And cookies locally in your gadget, you must take a stab at eliminating them.
- In case there is some misconfiguration in your past session, you might reset your gateway by doing a factory reset. To reset your router setup to its default settings, turn off your router’s power. And then press the little “reset” button at the rear of it for around 10 seconds. When the lights at the front of the router begin flickering it implies the modem has effectively reset.
Important Note: The factory reset option is ought to be your last choice. In case every past strategy failed, only then you must use this feature. As this isn’t the same as “restart” on the grounds that this will return all your manual settings like your SSID (network name), password, network settings, and MAC filtration.
During this interaction, any gadget associated with the WiFi (PC, versatile, TV) will get disconnected. Assuming you are utilizing Xfinity Voice you will not be able to get on calls or receive any. This crisis will continue until the gateway is again online.
Settings for Advanced Wireless Gateway
As a matter of fact, the security settings for your Wireless Gateway is WPA/WPA2 – which is the best WPA security currently. The past variant was weak which implies trespassers can get to your web from a distance. Anyway, you might have the option to design according to your prerequisites from Wireless Settings.
You can likewise arrange a firewall, parental control (to obstruct admittance to specific sites), IP and MAC restricting, transmission capacity control, port sending or port setting off when you need to add a game to your home wifi network.
It is encouraged to turn on a programmed firmware update to guard your router. However, if such a choice isn’t accessible you can physically download and introduce the product from the manufacturing site every few months.
Assuming you can’t find the username and password for a router, here’s a rundown of default passwords and usernames that might help you. Assuming you can’t remember the username and password, you should reset it to default settings. This re-establishes the switch to its default state i.e., username, IP address, and password.
You can utilize any IP address somewhere in the range of 10.0.0.0 and 10.255.255.255. Thus, the regularly mistyped addresses: 10.0.0.0.1, 10.0.01, 1.0.0.0.1, or https://10.0.0.0.1 don’t work.
10.0.0.1 (Routers Brands)
There are quite a few manufacturers of routers that use the 10.0.0.1 IP address. This is because it’s simple and even easy to remember. It is also used for business networks with a large number of gadgets; many home router networks are also signing up for this IP address. Here’s the list of the most famous router manufacturers using 10.0.0.1 IP:
SMC | Arris | Cisco |
Rogers | Aztech | Technicolo |
The router login process can be pretty technical and challenging for an average internet user. Therefore, some routers introduced quickly accessible applications like my rogers app, using which one can manage everyday needs such as access control, ssid settings, guest wifi, and more. If you still have any issues, use the comment section !